Florlift of New Jersey, Inc.   EST 1954 

General Specifications

• FlorLIFT multi-level handicapped lift
• Model number ML-102-TE-(FS or Btw)
• Rated capacity: 500 or 750 lbs
• Lifting/Lowering speed: 15 FPM
• Controls on a 24 volt safety circuit one cab station.  Power on-off keyswitch/raise lower pushbutton/light on-off keyswitch/push pull type stop alarm.
• Power on-off keyswitch.  Call only pushbutton.  All control is a constant pressure type (Deadman) per code in NEMA 1 type enclosure.

Standard and Safety Features

• Platform deck falling safety device
• Slack chain safety switch
• Two (2) steel roller suspension chains
• Upper and lower limits switches
• Intermediate landing transfer switch(s)*
• Mechanical fixed over-run stops
• Hydraulic overload protection
• Emergency lowering device
• Roof, hatch, light, and alarm
• Side thrust cam rollers
• Low pressure hydraulic design with 8000 lb. burst strength hose
• Adjustable lowering flow control valve at base of hydraulic ram
• Wall brackets with hardware*
• Remote pumping unit and controller*
• Unit cleaned and finished painted with machinery enamel electrostatically applied

*If Applicable

  Designed and manufactured to meet rigid safety standards.  FlorLIFT Multi Level totally enclosed lifts are the low cost solution to provide safe and easy movement of the handicapped from one floor to another.  Easily installed.  The lifts require minimum space and no extensive supplementary construction.  FlorLIFT Multi-Level complies with ANSI & ASME code A17.1 (LU/LA) "Limited Use/Limited Application" section 2000 for vertical rising handicapped lifting devices.  When placing an order FlorLIFT will prepare detailed drawings for your approval depicting exactly the general specifications required to suit the application including modifications or special features that might be needed. 

 FLORLFIT OF NJ, INC. RESERVES THE RIGHT TO CHANGE SPECIFICATIONS AND OR FEATURES